| Linacoustic RC insulation is a flexible duct liner made from strong glass fibers bonded with a thermosetting resin. The airstream surface is protected with JMs exclusive Reinforced Coating system, which combines our state-of-the-art Permacote acrylic coating with a flexible glass mat reinforcement to provide a smooth airstream surface. |
| Improves indoor building environment: Linacoustic RC duct liner improves indoor environmental quality by helping to control both temperature and sound |
| Resistant to dust and dirt: the tough acrylic polymer permacote coating helps guard against the incursion of dust or dirt into the substrate, minimizing the potential for biological growth |
| Will not support microbial growth: Permacote coating is formulated with an immobilized, EPA-registered agent to protect the coating from potential growth of fungi and bacteria |
| Linacoustic RC duct liner meets all requirements for fungi and bacterial resistance |
| Cleanability: if HVAC system cleaning is required, the reinforced coating airstream surface may be cleaned with industry-recognized dry methods |
| Highly resistant to water: the reinforced coating surface provides superior resistance to penetration of incidental water into the fiber glass wool core |
| Easy to fabricate: Linacoustic RC duct liner is lightweight and easy to handle |
| Minimizes pre-installation damage: Linacoustic RC duct liners reinforced coating system is highly resistant to damage that can occur during in-shop handling, fabrication, jobsite shipping and installation |
| Noise reduction coefficient (NRC): 0.85 (R6) |
| Factory-applied edge coating edge coating is factory applied to the edges of the liner core, ensuring coverage of the leading edges per NAIMA/SMACNA requirements, shop fabrication cuts may be coated with SuperSeal edge treatment |
| Air velocity: 6000 fpm (30.5 m/sec) |
| Water repellency: =6 |
| Conductance: 0.24 Btu/hr.sq-ft.deg F |
| R-Value: 4.2 hr.sq-ft-deg F/Btu |
